The atmospherics
In stock
WeatherDot
WeatherDot · CMI1033
Temperature, humidity, and pressure at your position, so the solver corrects elevation from the air your bullet actually flies through.
Battery
700 hrs
Weight
40 g
Rating
IP65
Height
32 mm
168.00 €
Free US shipping over $300
A 40 g weather station for the elevation half of your solution.
Temperature, humidity, and pressure at your position, sent to the free AnemoTracker Ballistics app for live viewing and logging. Density altitude from the air you are in, not an airport twenty miles away.
Up to 700 hours on a charge, and it threads onto the same mounts as the Mini so wind and atmosphere can share one pole.
What it gives you
Temperature
Humidity
Barometric pressure
Data logging and export
In the box
WeatherDot
Qi wireless charger
Travel pouch
User guide via QR code on the box
Works with
AnemoTracker Ballistics
WeatherDot · CMI1033
Atmosphere
Temperature
-15 to 60°C (5 to 140°F), ±0.5°C at 25°C
Humidity
20 to 80%, ±3.5%
Pressure
500 to 1200 hPa, ±1 hPa, 0.01 hPa res.
Sensors
BME280, NTCLE350E4103FHBO
Power
Type
Battery powered
Charging
Wireless Qi
Active use
Up to 700 hours
Standby
2,000 hours (advertising)
Data output
Bluetooth
BLE 5.1 or beyond
Range
Up to 30 m / 98 ft (free space)
Sample rate
1 Hz
Firmware
Upgradable via Bluetooth
Units (in app)
Temperature
°C, °F, K
Pressure
hPa, inHg, mmHg, kPa, atm
Humidity
%
Physical
Size
42 mm dia. × 22 mm (1.65 × 0.87 in)
Weight
40 g (1.41 oz)
Material
Injected engineering plastic, grey
Mount
1/4" female thread, Mini compatible
Environmental
IP grade
IP65
Operating
-15 to 60°C, no frost
Humidity
20 to 80% RH
PDF
Data sheet
Temperature, humidity, pressure, power and physical specs.
CMI1033 · 2025 · English
↓
PDF
User manual
Setup, charging, pairing, installation, troubleshooting.
CMI1033 · November 2023 · English
↓
Quick start, from the manual
01
Unbox it fully
Take the unit out of its case and packaging. Readings taken inside the packaging will be wrong.
02
Charge upside down
Tripod thread facing up on the Qi base. About 1 hour to full. Let it settle a few minutes before use.
03
Install the app
AnemoTracker Ballistics from Google Play or the App Store, with Bluetooth on.
04
Pair and shoot
Settings, Pair, then pick the WeatherDot matching the MAC number on your box. Unpair when done to save battery.
Tripod mount1/4" thread
Standard 1/4" female thread fits any camera or shooting tripod.
Included
Qi wireless chargerIn box
Charge upside down, about 1 hour to full.
Included
Mast mount for Portable MiniCMI1028
Puts the unit up on a pole, out of your body’s wind shadow.
Shop
Phone mountCMI1023
Readout and rifle in the same eyeline.
26.00 €
Introducing WeatherDot: Your Portable Weather Station for Accurate Environmental Monitoring
Watch on YouTube →
WeatherDot playlist · 5 videos
New · Calypso Ballistics app
Wind, turned into a hold in MIL
Our new app built for shooting. Crosswind times your drift per MPH, a shooter's clock, lull and gust bracket, plus air density with a WeatherDot.
